Post by WVsnowflake on Mar 1, 2008 19:58:29 GMT -6
Materials
23" square black felted wool (appliqué foundation)
8×10" piece moss green felted wool (stem appliqués)
10" square olive green felted wool (leaf appliqués)
14" square burgundy check felted wool (flower appliqués)
8" square dark red felted wool (flower appliqués, center circle)
12" square dark gold felted wool (bud and flower appliqués)
6" square light gold felted wool (bud appliqués)
1/4 yard red stripe (binding)
27" square backing fabric
Lightweight fusible web
Finished quilt: 23" square
Quantities are for 44/45"-wide, 100% cotton fabrics unless otherwise specified.
Measurements include 1/4" seam allowances. Sew with right sides together unless otherwise stated.
Cut pieces in the following order. (Download PDF for patterns.)
To felt wool, machine-wash it in a hot-water-wash, cold-rinse cycle. Machine-dry on high heat and steam-press.
To use fusible web for appliquéing, complete the following steps.
1. Lay fusible web, paper side up, over patterns. Use a pencil to trace each pattern the number of times indicated in cutting instructions, leaving 1/2" between tracings. Cut out fusible-web shapes roughly 1/4" outside traced lines.
2. Following the manufacturer’s instructions, press fusible-web shapes onto wrong side of designated fabrics; let cool. Cut out fabric shapes on drawn lines. Peel off paper backings.
From moss green wool, cut:
4 each of patterns A, B, and C
From olive green wool, cut:
4 each of patterns D and D reversed
From burgundy check wool, cut:
4 each of patterns E and G
1 of Pattern L
From dark red wool, cut:
4 of Pattern F
From dark gold wool, cut:
1 each of patterns J, J reversed, K, and K reversed
8 of Pattern H
From light gold wool, cut:
4 each of patterns I and I reversed
From red stripe, cut:
3 -- 2-1/2x42" binding strips
Appliqué Quilt Top
1. Referring to Appliqué Placement Diagram, position all appliqués on black wool 23" square. Fuse all pieces in place.
2. Using matching thread and working from bottom layer to top, machine-blanket-stitch around each appliqué to complete quilt top.
Finish Quilt
1. Layer quilt top and backing; baste around raw edges.
(Designer Avis Shirer did not quilt her table topper.)
2. Bind with red stripe binding strips.
